STM32 programming and BOOT0 pin The 2019 Stack Overflow Developer Survey Results Are InSTM32F102 USB ProgrammingSTM32F303RET's core is always halted after programmingST-Link debugger/programmer failed to find STM32L152 MCU on designed PCBSTM32 prototype unable to connect to PC using ST-Link/V2 SWDSTM32 'Connect under reset' suddenly stopped workingCannot Program a Custom STM32 BoardWhy is this hex file different than the code programmed onto the device?STM32F091 Jump to Bootloader from applicationSTM32 & ST-LINK - SWD connector not workingSTM32F0 - interrupt/breakpoint not working on certain hardware

Who coined the term "madman theory"?

How to manage monthly salary

What does Linus Torvalds mean when he says that Git "never ever" tracks a file?

Write faster on AT24C32

How to obtain Confidence Intervals for a LASSO regression?

What does "fetching by region is not available for SAM files" means?

Have you ever entered Singapore using a different passport or name?

Is there a symbol for a right arrow with a square in the middle?

Deal with toxic manager when you can't quit

Identify This Plant (Flower)

How can I autofill dates in Excel excluding Sunday?

Are there any other methods to apply to solving simultaneous equations?

Building a conditional check constraint

Protecting Dualbooting Windows from dangerous code (like rm -rf)

Can one be advised by a professor who is very far away?

Which Sci-Fi work first showed weapon of galactic-scale mass destruction?

Is flight data recorder erased after every flight?

If a Druid sees an animal’s corpse, can they wild shape into that animal?

What are the motivations for publishing new editions of an existing textbook, beyond new discoveries in a field?

Delete all lines which don't have n characters before delimiter

Is an up-to-date browser secure on an out-of-date OS?

Is three citations per paragraph excessive for undergraduate research paper?

Can a flute soloist sit?

Return to UK after being refused entry years previously



STM32 programming and BOOT0 pin



The 2019 Stack Overflow Developer Survey Results Are InSTM32F102 USB ProgrammingSTM32F303RET's core is always halted after programmingST-Link debugger/programmer failed to find STM32L152 MCU on designed PCBSTM32 prototype unable to connect to PC using ST-Link/V2 SWDSTM32 'Connect under reset' suddenly stopped workingCannot Program a Custom STM32 BoardWhy is this hex file different than the code programmed onto the device?STM32F091 Jump to Bootloader from applicationSTM32 & ST-LINK - SWD connector not workingSTM32F0 - interrupt/breakpoint not working on certain hardware



.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;








1












$begingroup$


I am developing a STM32H7 board which will be programmed via SWD.



I am curious, is there any reason why I should connect BOOT0 pin to GND via resistor and not directly to GND?



I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?










share|improve this question









$endgroup$











  • $begingroup$
    if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
    $endgroup$
    – jsotola
    32 mins ago

















1












$begingroup$


I am developing a STM32H7 board which will be programmed via SWD.



I am curious, is there any reason why I should connect BOOT0 pin to GND via resistor and not directly to GND?



I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?










share|improve this question









$endgroup$











  • $begingroup$
    if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
    $endgroup$
    – jsotola
    32 mins ago













1












1








1





$begingroup$


I am developing a STM32H7 board which will be programmed via SWD.



I am curious, is there any reason why I should connect BOOT0 pin to GND via resistor and not directly to GND?



I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?










share|improve this question









$endgroup$




I am developing a STM32H7 board which will be programmed via SWD.



I am curious, is there any reason why I should connect BOOT0 pin to GND via resistor and not directly to GND?



I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?







stm32 bootloader






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 4 hours ago









ningboningbo

243




243











  • $begingroup$
    if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
    $endgroup$
    – jsotola
    32 mins ago
















  • $begingroup$
    if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
    $endgroup$
    – jsotola
    32 mins ago















$begingroup$
if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
$endgroup$
– jsotola
32 mins ago




$begingroup$
if you have a resistor to ground, then you can change the state of the pin by connecting it to Vcc ... if the pin is connected to ground directly, then you have to disconnect it before it can be pulled high
$endgroup$
– jsotola
32 mins ago










2 Answers
2






active

oldest

votes


















2












$begingroup$

If you're making a board, why not provide for a resistor/jumper to connect Boot0 to +V and GND? Then only populate one of them? Leave your options open. You don't need a resistor. I prefer to use a jumper rather than a resistor.



You can use header shunts as jumpers that can be easily changed but that takes more PCB space, components and more assembly work. Or just place an SMD chip footprint you can either choose to use an SMD resistor or SMD jumper (zero ohm resistor) during assembly. Then you can fiddle with things all you want after-the-fact.






share|improve this answer











$endgroup$




















    2












    $begingroup$


    I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?




    That's exactly why you might want to use a resistor and not a zero ohm jumper. With a resistor, you can manually override it with a piece of wire to the opposite rail start in bootloader mode once, without having to get out the hot air station and change the resistor.



    Granted, if you have the hardware reset line brought out, and an SWD probe that actually drives it, and a suitable SWD software config (both common points of failure - and specifically a failure that may not be noticed in routine use, but only when this kind of recovery fails to work) then that is another way to work around disabled SWD lines.






    share|improve this answer









    $endgroup$













      Your Answer





      StackExchange.ifUsing("editor", function ()
      return StackExchange.using("mathjaxEditing", function ()
      StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
      StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
      );
      );
      , "mathjax-editing");

      StackExchange.ifUsing("editor", function ()
      return StackExchange.using("schematics", function ()
      StackExchange.schematics.init();
      );
      , "cicuitlab");

      StackExchange.ready(function()
      var channelOptions =
      tags: "".split(" "),
      id: "135"
      ;
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function()
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled)
      StackExchange.using("snippets", function()
      createEditor();
      );

      else
      createEditor();

      );

      function createEditor()
      StackExchange.prepareEditor(
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader:
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      ,
      onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      );



      );













      draft saved

      draft discarded


















      StackExchange.ready(
      function ()
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f431871%2fstm32-programming-and-boot0-pin%23new-answer', 'question_page');

      );

      Post as a guest















      Required, but never shown

























      2 Answers
      2






      active

      oldest

      votes








      2 Answers
      2






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      2












      $begingroup$

      If you're making a board, why not provide for a resistor/jumper to connect Boot0 to +V and GND? Then only populate one of them? Leave your options open. You don't need a resistor. I prefer to use a jumper rather than a resistor.



      You can use header shunts as jumpers that can be easily changed but that takes more PCB space, components and more assembly work. Or just place an SMD chip footprint you can either choose to use an SMD resistor or SMD jumper (zero ohm resistor) during assembly. Then you can fiddle with things all you want after-the-fact.






      share|improve this answer











      $endgroup$

















        2












        $begingroup$

        If you're making a board, why not provide for a resistor/jumper to connect Boot0 to +V and GND? Then only populate one of them? Leave your options open. You don't need a resistor. I prefer to use a jumper rather than a resistor.



        You can use header shunts as jumpers that can be easily changed but that takes more PCB space, components and more assembly work. Or just place an SMD chip footprint you can either choose to use an SMD resistor or SMD jumper (zero ohm resistor) during assembly. Then you can fiddle with things all you want after-the-fact.






        share|improve this answer











        $endgroup$















          2












          2








          2





          $begingroup$

          If you're making a board, why not provide for a resistor/jumper to connect Boot0 to +V and GND? Then only populate one of them? Leave your options open. You don't need a resistor. I prefer to use a jumper rather than a resistor.



          You can use header shunts as jumpers that can be easily changed but that takes more PCB space, components and more assembly work. Or just place an SMD chip footprint you can either choose to use an SMD resistor or SMD jumper (zero ohm resistor) during assembly. Then you can fiddle with things all you want after-the-fact.






          share|improve this answer











          $endgroup$



          If you're making a board, why not provide for a resistor/jumper to connect Boot0 to +V and GND? Then only populate one of them? Leave your options open. You don't need a resistor. I prefer to use a jumper rather than a resistor.



          You can use header shunts as jumpers that can be easily changed but that takes more PCB space, components and more assembly work. Or just place an SMD chip footprint you can either choose to use an SMD resistor or SMD jumper (zero ohm resistor) during assembly. Then you can fiddle with things all you want after-the-fact.







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited 3 hours ago

























          answered 3 hours ago









          ToorToor

          1,527210




          1,527210























              2












              $begingroup$


              I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?




              That's exactly why you might want to use a resistor and not a zero ohm jumper. With a resistor, you can manually override it with a piece of wire to the opposite rail start in bootloader mode once, without having to get out the hot air station and change the resistor.



              Granted, if you have the hardware reset line brought out, and an SWD probe that actually drives it, and a suitable SWD software config (both common points of failure - and specifically a failure that may not be noticed in routine use, but only when this kind of recovery fails to work) then that is another way to work around disabled SWD lines.






              share|improve this answer









              $endgroup$

















                2












                $begingroup$


                I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?




                That's exactly why you might want to use a resistor and not a zero ohm jumper. With a resistor, you can manually override it with a piece of wire to the opposite rail start in bootloader mode once, without having to get out the hot air station and change the resistor.



                Granted, if you have the hardware reset line brought out, and an SWD probe that actually drives it, and a suitable SWD software config (both common points of failure - and specifically a failure that may not be noticed in routine use, but only when this kind of recovery fails to work) then that is another way to work around disabled SWD lines.






                share|improve this answer









                $endgroup$















                  2












                  2








                  2





                  $begingroup$


                  I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?




                  That's exactly why you might want to use a resistor and not a zero ohm jumper. With a resistor, you can manually override it with a piece of wire to the opposite rail start in bootloader mode once, without having to get out the hot air station and change the resistor.



                  Granted, if you have the hardware reset line brought out, and an SWD probe that actually drives it, and a suitable SWD software config (both common points of failure - and specifically a failure that may not be noticed in routine use, but only when this kind of recovery fails to work) then that is another way to work around disabled SWD lines.






                  share|improve this answer









                  $endgroup$




                  I won't be using the bootloader but can it happen that I accidentally disable the debug port from software and then can't program the MCU via SWD anymore and need to use bootloader mode by putting BOOT0 high?




                  That's exactly why you might want to use a resistor and not a zero ohm jumper. With a resistor, you can manually override it with a piece of wire to the opposite rail start in bootloader mode once, without having to get out the hot air station and change the resistor.



                  Granted, if you have the hardware reset line brought out, and an SWD probe that actually drives it, and a suitable SWD software config (both common points of failure - and specifically a failure that may not be noticed in routine use, but only when this kind of recovery fails to work) then that is another way to work around disabled SWD lines.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered 3 hours ago









                  Chris StrattonChris Stratton

                  23.2k22865




                  23.2k22865



























                      draft saved

                      draft discarded
















































                      Thanks for contributing an answer to Electrical Engineering Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid


                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.

                      Use MathJax to format equations. MathJax reference.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function ()
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f431871%2fstm32-programming-and-boot0-pin%23new-answer', 'question_page');

                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Disable / Remove link to Product Items in Cart Planned maintenance scheduled April 23, 2019 at 23:30 UTC (7:30pm US/Eastern) Announcing the arrival of Valued Associate #679: Cesar Manara Unicorn Meta Zoo #1: Why another podcast?How can I limit products that can be bought / added to cart?Remove item from cartHide “Add to Cart” button if specific products are already in cart“Prettifying” the custom options in cart pageCreate link in cart sidebar to view all added items After limit reachedLink products together in checkout/cartHow to Get product from cart and add it againHide action-edit on cart page if simple productRemoving Cart items - ObserverRemove wishlist items when added to cart

                      Helsingin valtaus Sisällysluettelo Taustaa | Yleistä sotatoimista | Osapuolet | Taistelut Helsingin ympäristössä | Punaisten antautumissuunnitelma | Taistelujen kulku Helsingissä | Valtauksen jälkeen | Tappiot | Muistaminen | Kirjallisuutta | Lähteet | Aiheesta muualla | NavigointivalikkoTeoksen verkkoversioTeoksen verkkoversioGoogle BooksSisällissota Helsingissä päättyi tasan 95 vuotta sittenSaksalaisten ylivoima jyräsi punaisen HelsinginSuomalaiset kuvaavat sotien jälkiä kaupungeissa – katso kuvat ja tarinat tutuilta kulmiltaHelsingin valtaus 90 vuotta sittenSaksalaiset valtasivat HelsinginHyökkäys HelsinkiinHelsingin valtaus 12.–13.4. 1918Saksalaiset käyttivät ihmiskilpiä Helsingin valtauksessa 1918Teoksen verkkoversioTeoksen verkkoversioSaksalaiset hyökkäävät Etelä-SuomeenTaistelut LeppävaarassaSotilaat ja taistelutLeppävaara 1918 huhtikuussa. KapinatarinaHelsingin taistelut 1918Saksalaisten voitonparaati HelsingissäHelsingin valtausta juhlittiinSaksalaisten Helsinki vuonna 1918Helsingin taistelussa kaatuneet valkokaartilaisetHelsinkiin haudatut taisteluissa kaatuneet punaiset12.4.1918 Helsingin valtauksessa saksalaiset apujoukot vapauttavat kaupunginVapaussodan muistomerkkejä Helsingissä ja pääkaupunkiseudullaCrescendo / Vuoden 1918 Kansalaissodan uhrien muistomerkkim

                      Adjektiivitarina Tarinan tekeminen | Esimerkki: ennen | Esimerkki: jälkeen | Navigointivalikko