HP P840 HDD RAID 5 many strange drive faiuresHP SmartArray P400: How to repair failed logical drive?Reusing Raid 5 Drive?reliably and automatically determine connection path of physical position of HDD from /dev/sdX device fileHow to replace failed drive in RAID 5 array in HP DL380 G4 serverQuestions on increasing RAID 5 arrayRaid 10, Logical device are missingHP Code 341 “Physical Drive State: Predictive failure. This physical drive is predicted to fail soon.”HPE 1.92TB SATA 6G Mixed Use SFF SSD very slow compared to SAS HDD HP disksHP drive array “ready for rebuild” (RAID5)Hard Disc Failure or RAID Glitch
Multi tool use
What is better - deleting a copy constructor as private or public?
Had had (Is it a past perfect or past simple)
Different outputs for `w`, `who`, `whoami` and `id`
Why does a Star of David appear at a rally with Francisco Franco?
How could a scammer know the apps on my phone / iTunes account?
This word with a lot of past tenses
If I can solve Sudoku, can I solve the Travelling Salesman Problem (TSP)? If so, how?
Is honey really a supersaturated solution? Does heating to un-crystalize redissolve it or melt it?
Employee lack of ownership
Four married couples attend a party. Each person shakes hands with every other person, except their own spouse, exactly once. How many handshakes?
How to make healing in an exploration game interesting
Calculate the frequency of characters in a string
Could the Saturn V actually have launched astronauts around Venus?
HP P840 HDD RAID 5 many strange drive faiures
Unnormalized Log Probability - RNN
Does .bashrc contain syntax errors?
Why is there is so much iron?
What does "la" mean in Canadian French when tacked on at the end of a sentence?
Simplify an interface for flexibly applying rules to periods of time
About the actual radiative impact of greenhouse gas emission over time
Non-trivial topology where only open sets are closed
centering a caption under a table
Python if-else code style for reduced code for rounding floats
Is it ever recommended to use mean/multiple imputation when using tree-based predictive models?
HP P840 HDD RAID 5 many strange drive faiures
HP SmartArray P400: How to repair failed logical drive?Reusing Raid 5 Drive?reliably and automatically determine connection path of physical position of HDD from /dev/sdX device fileHow to replace failed drive in RAID 5 array in HP DL380 G4 serverQuestions on increasing RAID 5 arrayRaid 10, Logical device are missingHP Code 341 “Physical Drive State: Predictive failure. This physical drive is predicted to fail soon.”HPE 1.92TB SATA 6G Mixed Use SFF SSD very slow compared to SAS HDD HP disksHP drive array “ready for rebuild” (RAID5)Hard Disc Failure or RAID Glitch
2
I've been using a RAID5 HDD storage (8x6TB) at my HP P840 for like 2 years now and it has always had unusually many drive failures. Everything was good for half a year, but now drives are failing in a strange way.
For example 2 new drives failed a few days after they have been added to the RAID.
I have also already replaced the RAID controller and am using up-to-date firmware on Mainboard and RAID controller.
Also I have tried to use different drives.
Initially there were HGST DeskStar 6TB drives used in that RAID, now I have been replacing them with HGST UltraStar 6TB when replacing failed drives. But the behaviour is the same.
Also it seems (most of) the drives are not really failed, because once I replaced the RAID controller, one failed drive was recognized as OK again and the rebuild started.
My hoster's support says the problem is that I'm actually using RAID5 and I should switch to RAID10 instead. It's hard for me to believe as I've been using RAID5 without problems at other systems (no drive failures in years).
Can anyone give me a hint, what else the culprit could be? Something wrong with the way the RAID controller is configured?
Thank you!
Smart Array P840 in Slot 1 (sn: PDNNF0ARH321GD)
Port Name: 1I
Port Name: 2I
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 2I, Box 1, OK
array A (Solid State SATA, Unused Space: 0 MB)
logicaldrive 1 (447.1 GB, RAID 1+0, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (38.2 TB, RAID 5, Interim Recovery Mode)
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:5 (port 1I:box 2:bay 5, SATA, 6001.1 GB, Failed)
physicaldrive 1I:2:6 (port 1I:box 2:bay 6, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:7 (port 1I:box 2:bay 7, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:8 (port 1I:box 2:bay 8, SATA, 6001.1 GB, OK)
Detailed Info:
Smart Array P840 in Slot 1
Bus Interface: PCI
Slot: 1
Serial Number: PDNNF0ARH321GD
Cache Serial Number: PEYFP0BRH323YZ
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.60
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Drive Write Cache: Enabled
Total Cache Size: 4.0 GB
Total Cache Memory Available: 3.2 GB
No-Battery Write Cache: Enabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 51
Cache Module Temperature (C): 38
Number of Ports: 2 Internal only
Encryption: Disabled
Express Local Encryption: False
Driver Name: hpsa
Driver Version: 3.4.16
Driver Supports HP SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:06:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: RAID
Controller Mode Reboot: Not Required
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Host Serial Number: CZ270500GM
Sanitize Erase Supported: False
Primary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Secondary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Port Name: 1I
Port ID: 0
Port Connection Number: 0
SAS Address: 5001438038AD05A0
Port Location: Internal
Managed Cable Connected: False
Port Name: 2I
Port ID: 1
Port Connection Number: 1
SAS Address: 5001438038AD05A8
Port Location: Internal
Managed Cable Connected: False
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 2I, Box 1, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 2I
Box: 1
Location: Internal
Physical Drives
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
None attached
Array: A
Interface Type: Solid State SATA
Unused Space: 0 MB (0.0%)
Used Space: 894.2 GB (100.0%)
Status: OK
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Logical Drive: 1
Size: 447.1 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 512 KB
Status: OK
MultiDomain Status: OK
Caching: Enabled
Unique Identifier: 600508B1001CE0F9FACF3A1358647115
Disk Name: /dev/sda
Mount Points: / 18.6 GB Partition Number 2
OS Status: LOCKED
Logical Drive Label: 0216D6F9PDNNF0ARH502MC7DFA
Mirror Group 1:
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 2I:1:1
Port: 2I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004AG240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 39
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV706303CH240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 36
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:3
Port: 2I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712003V8240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 35
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:4
Port: 2I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004GA240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 37
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
Array: B
Interface Type: SATA
Unused Space: 0 MB (0.0%)
Used Space: 43.7 TB (100.0%)
Status: Failed Physical Drive
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Warning: One of the drives on this array have failed or has been removed.
Logical Drive: 2
Size: 38.2 TB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 1792 KB
Status: Interim Recovery Mode
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Failed
Unique Identifier: 600508B1001CF94F84873C91FD89B549
Disk Name: /dev/sdb
Mount Points: None
Logical Drive Label: 04DA1DD6PDNNF0ARH502MC546F
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:2:1
Port: 1I
Box: 2
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHN3UZY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:2
Port: 1I
Box: 2
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNT517
Serial Number: NAHLKP0X
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 56
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:3
Port: 1I
Box: 2
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: NCH8E81Z
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:4
Port: 1I
Box: 2
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHYMAUY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:5
Port: 1I
Box: 2
Bay: 5
Status: Failed
Last Failure Reason: Write retries failed
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H942MD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: False
physicaldrive 1I:2:6
Port: 1I
Box: 2
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: TDR2
Serial Number: K8JM5TKN
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:7
Port: 1I
Box: 2
Bay: 7
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: K8H9BW2N
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 39
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:8
Port: 1I
Box: 2
Bay: 8
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H623JD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 35
Maximum Temperature (C): 40
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
raid raid5 hp-smart-array drive-failure raid-controller
asked 2 hours ago
MartinMartin
183
add a comment |
2
I've been using a RAID5 HDD storage (8x6TB) at my HP P840 for like 2 years now and it has always had unusually many drive failures. Everything was good for half a year, but now drives are failing in a strange way.
For example 2 new drives failed a few days after they have been added to the RAID.
I have also already replaced the RAID controller and am using up-to-date firmware on Mainboard and RAID controller.
Also I have tried to use different drives.
Initially there were HGST DeskStar 6TB drives used in that RAID, now I have been replacing them with HGST UltraStar 6TB when replacing failed drives. But the behaviour is the same.
Also it seems (most of) the drives are not really failed, because once I replaced the RAID controller, one failed drive was recognized as OK again and the rebuild started.
My hoster's support says the problem is that I'm actually using RAID5 and I should switch to RAID10 instead. It's hard for me to believe as I've been using RAID5 without problems at other systems (no drive failures in years).
Can anyone give me a hint, what else the culprit could be? Something wrong with the way the RAID controller is configured?
Thank you!
Smart Array P840 in Slot 1 (sn: PDNNF0ARH321GD)
Port Name: 1I
Port Name: 2I
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 2I, Box 1, OK
array A (Solid State SATA, Unused Space: 0 MB)
logicaldrive 1 (447.1 GB, RAID 1+0, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (38.2 TB, RAID 5, Interim Recovery Mode)
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:5 (port 1I:box 2:bay 5, SATA, 6001.1 GB, Failed)
physicaldrive 1I:2:6 (port 1I:box 2:bay 6, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:7 (port 1I:box 2:bay 7, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:8 (port 1I:box 2:bay 8, SATA, 6001.1 GB, OK)
Detailed Info:
Smart Array P840 in Slot 1
Bus Interface: PCI
Slot: 1
Serial Number: PDNNF0ARH321GD
Cache Serial Number: PEYFP0BRH323YZ
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.60
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Drive Write Cache: Enabled
Total Cache Size: 4.0 GB
Total Cache Memory Available: 3.2 GB
No-Battery Write Cache: Enabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 51
Cache Module Temperature (C): 38
Number of Ports: 2 Internal only
Encryption: Disabled
Express Local Encryption: False
Driver Name: hpsa
Driver Version: 3.4.16
Driver Supports HP SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:06:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: RAID
Controller Mode Reboot: Not Required
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Host Serial Number: CZ270500GM
Sanitize Erase Supported: False
Primary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Secondary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Port Name: 1I
Port ID: 0
Port Connection Number: 0
SAS Address: 5001438038AD05A0
Port Location: Internal
Managed Cable Connected: False
Port Name: 2I
Port ID: 1
Port Connection Number: 1
SAS Address: 5001438038AD05A8
Port Location: Internal
Managed Cable Connected: False
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 2I, Box 1, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 2I
Box: 1
Location: Internal
Physical Drives
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
None attached
Array: A
Interface Type: Solid State SATA
Unused Space: 0 MB (0.0%)
Used Space: 894.2 GB (100.0%)
Status: OK
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Logical Drive: 1
Size: 447.1 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 512 KB
Status: OK
MultiDomain Status: OK
Caching: Enabled
Unique Identifier: 600508B1001CE0F9FACF3A1358647115
Disk Name: /dev/sda
Mount Points: / 18.6 GB Partition Number 2
OS Status: LOCKED
Logical Drive Label: 0216D6F9PDNNF0ARH502MC7DFA
Mirror Group 1:
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 2I:1:1
Port: 2I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004AG240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 39
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV706303CH240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 36
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:3
Port: 2I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712003V8240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 35
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:4
Port: 2I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004GA240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 37
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
Array: B
Interface Type: SATA
Unused Space: 0 MB (0.0%)
Used Space: 43.7 TB (100.0%)
Status: Failed Physical Drive
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Warning: One of the drives on this array have failed or has been removed.
Logical Drive: 2
Size: 38.2 TB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 1792 KB
Status: Interim Recovery Mode
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Failed
Unique Identifier: 600508B1001CF94F84873C91FD89B549
Disk Name: /dev/sdb
Mount Points: None
Logical Drive Label: 04DA1DD6PDNNF0ARH502MC546F
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:2:1
Port: 1I
Box: 2
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHN3UZY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:2
Port: 1I
Box: 2
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNT517
Serial Number: NAHLKP0X
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 56
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:3
Port: 1I
Box: 2
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: NCH8E81Z
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:4
Port: 1I
Box: 2
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHYMAUY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:5
Port: 1I
Box: 2
Bay: 5
Status: Failed
Last Failure Reason: Write retries failed
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H942MD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: False
physicaldrive 1I:2:6
Port: 1I
Box: 2
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: TDR2
Serial Number: K8JM5TKN
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:7
Port: 1I
Box: 2
Bay: 7
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: K8H9BW2N
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 39
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:8
Port: 1I
Box: 2
Bay: 8
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H623JD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 35
Maximum Temperature (C): 40
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
raid raid5 hp-smart-array drive-failure raid-controller
asked 2 hours ago
MartinMartin
183
add a comment |
2
2
2
I've been using a RAID5 HDD storage (8x6TB) at my HP P840 for like 2 years now and it has always had unusually many drive failures. Everything was good for half a year, but now drives are failing in a strange way.
For example 2 new drives failed a few days after they have been added to the RAID.
I have also already replaced the RAID controller and am using up-to-date firmware on Mainboard and RAID controller.
Also I have tried to use different drives.
Initially there were HGST DeskStar 6TB drives used in that RAID, now I have been replacing them with HGST UltraStar 6TB when replacing failed drives. But the behaviour is the same.
Also it seems (most of) the drives are not really failed, because once I replaced the RAID controller, one failed drive was recognized as OK again and the rebuild started.
My hoster's support says the problem is that I'm actually using RAID5 and I should switch to RAID10 instead. It's hard for me to believe as I've been using RAID5 without problems at other systems (no drive failures in years).
Can anyone give me a hint, what else the culprit could be? Something wrong with the way the RAID controller is configured?
Thank you!
Smart Array P840 in Slot 1 (sn: PDNNF0ARH321GD)
Port Name: 1I
Port Name: 2I
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 2I, Box 1, OK
array A (Solid State SATA, Unused Space: 0 MB)
logicaldrive 1 (447.1 GB, RAID 1+0, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (38.2 TB, RAID 5, Interim Recovery Mode)
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:5 (port 1I:box 2:bay 5, SATA, 6001.1 GB, Failed)
physicaldrive 1I:2:6 (port 1I:box 2:bay 6, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:7 (port 1I:box 2:bay 7, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:8 (port 1I:box 2:bay 8, SATA, 6001.1 GB, OK)
Detailed Info:
Smart Array P840 in Slot 1
Bus Interface: PCI
Slot: 1
Serial Number: PDNNF0ARH321GD
Cache Serial Number: PEYFP0BRH323YZ
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.60
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Drive Write Cache: Enabled
Total Cache Size: 4.0 GB
Total Cache Memory Available: 3.2 GB
No-Battery Write Cache: Enabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 51
Cache Module Temperature (C): 38
Number of Ports: 2 Internal only
Encryption: Disabled
Express Local Encryption: False
Driver Name: hpsa
Driver Version: 3.4.16
Driver Supports HP SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:06:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: RAID
Controller Mode Reboot: Not Required
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Host Serial Number: CZ270500GM
Sanitize Erase Supported: False
Primary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Secondary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Port Name: 1I
Port ID: 0
Port Connection Number: 0
SAS Address: 5001438038AD05A0
Port Location: Internal
Managed Cable Connected: False
Port Name: 2I
Port ID: 1
Port Connection Number: 1
SAS Address: 5001438038AD05A8
Port Location: Internal
Managed Cable Connected: False
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 2I, Box 1, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 2I
Box: 1
Location: Internal
Physical Drives
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
None attached
Array: A
Interface Type: Solid State SATA
Unused Space: 0 MB (0.0%)
Used Space: 894.2 GB (100.0%)
Status: OK
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Logical Drive: 1
Size: 447.1 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 512 KB
Status: OK
MultiDomain Status: OK
Caching: Enabled
Unique Identifier: 600508B1001CE0F9FACF3A1358647115
Disk Name: /dev/sda
Mount Points: / 18.6 GB Partition Number 2
OS Status: LOCKED
Logical Drive Label: 0216D6F9PDNNF0ARH502MC7DFA
Mirror Group 1:
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 2I:1:1
Port: 2I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004AG240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 39
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV706303CH240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 36
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:3
Port: 2I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712003V8240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 35
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:4
Port: 2I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004GA240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 37
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
Array: B
Interface Type: SATA
Unused Space: 0 MB (0.0%)
Used Space: 43.7 TB (100.0%)
Status: Failed Physical Drive
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Warning: One of the drives on this array have failed or has been removed.
Logical Drive: 2
Size: 38.2 TB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 1792 KB
Status: Interim Recovery Mode
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Failed
Unique Identifier: 600508B1001CF94F84873C91FD89B549
Disk Name: /dev/sdb
Mount Points: None
Logical Drive Label: 04DA1DD6PDNNF0ARH502MC546F
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:2:1
Port: 1I
Box: 2
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHN3UZY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:2
Port: 1I
Box: 2
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNT517
Serial Number: NAHLKP0X
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 56
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:3
Port: 1I
Box: 2
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: NCH8E81Z
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:4
Port: 1I
Box: 2
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHYMAUY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:5
Port: 1I
Box: 2
Bay: 5
Status: Failed
Last Failure Reason: Write retries failed
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H942MD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: False
physicaldrive 1I:2:6
Port: 1I
Box: 2
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: TDR2
Serial Number: K8JM5TKN
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:7
Port: 1I
Box: 2
Bay: 7
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: K8H9BW2N
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 39
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:8
Port: 1I
Box: 2
Bay: 8
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H623JD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 35
Maximum Temperature (C): 40
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
raid raid5 hp-smart-array drive-failure raid-controller
asked 2 hours ago
MartinMartin
183
I've been using a RAID5 HDD storage (8x6TB) at my HP P840 for like 2 years now and it has always had unusually many drive failures. Everything was good for half a year, but now drives are failing in a strange way.
For example 2 new drives failed a few days after they have been added to the RAID.
I have also already replaced the RAID controller and am using up-to-date firmware on Mainboard and RAID controller.
Also I have tried to use different drives.
Initially there were HGST DeskStar 6TB drives used in that RAID, now I have been replacing them with HGST UltraStar 6TB when replacing failed drives. But the behaviour is the same.
Also it seems (most of) the drives are not really failed, because once I replaced the RAID controller, one failed drive was recognized as OK again and the rebuild started.
My hoster's support says the problem is that I'm actually using RAID5 and I should switch to RAID10 instead. It's hard for me to believe as I've been using RAID5 without problems at other systems (no drive failures in years).
Can anyone give me a hint, what else the culprit could be? Something wrong with the way the RAID controller is configured?
Thank you!
Smart Array P840 in Slot 1 (sn: PDNNF0ARH321GD)
Port Name: 1I
Port Name: 2I
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 1I, Box 2, OK
Internal Drive Cage at Port 2I, Box 1, OK
array A (Solid State SATA, Unused Space: 0 MB)
logicaldrive 1 (447.1 GB, RAID 1+0, OK)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (38.2 TB, RAID 5, Interim Recovery Mode)
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:5 (port 1I:box 2:bay 5, SATA, 6001.1 GB, Failed)
physicaldrive 1I:2:6 (port 1I:box 2:bay 6, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:7 (port 1I:box 2:bay 7, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:8 (port 1I:box 2:bay 8, SATA, 6001.1 GB, OK)
Detailed Info:
Smart Array P840 in Slot 1
Bus Interface: PCI
Slot: 1
Serial Number: PDNNF0ARH321GD
Cache Serial Number: PEYFP0BRH323YZ
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 6.60
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Drive Write Cache: Enabled
Total Cache Size: 4.0 GB
Total Cache Memory Available: 3.2 GB
No-Battery Write Cache: Enabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 51
Cache Module Temperature (C): 38
Number of Ports: 2 Internal only
Encryption: Disabled
Express Local Encryption: False
Driver Name: hpsa
Driver Version: 3.4.16
Driver Supports HP SSD Smart Path: True
PCI Address (Domain:Bus:Device.Function): 0000:06:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: RAID
Controller Mode Reboot: Not Required
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Host Serial Number: CZ270500GM
Sanitize Erase Supported: False
Primary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Secondary Boot Volume: logicaldrive 1 (600508B1001CE0F9FACF3A1358647115)
Port Name: 1I
Port ID: 0
Port Connection Number: 0
SAS Address: 5001438038AD05A0
Port Location: Internal
Managed Cable Connected: False
Port Name: 2I
Port ID: 1
Port Connection Number: 1
SAS Address: 5001438038AD05A8
Port Location: Internal
Managed Cable Connected: False
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 1I, Box 2, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 1I
Box: 2
Location: Internal
Physical Drives
physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:2 (port 1I:box 2:bay 2, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:3 (port 1I:box 2:bay 3, SATA, 6001.1 GB, OK)
physicaldrive 1I:2:4 (port 1I:box 2:bay 4, SATA, 6001.1 GB, OK)
None attached
Internal Drive Cage at Port 2I, Box 1, OK
Power Supply Status: Not Redundant
Drive Bays: 4
Port: 2I
Box: 1
Location: Internal
Physical Drives
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
None attached
Array: A
Interface Type: Solid State SATA
Unused Space: 0 MB (0.0%)
Used Space: 894.2 GB (100.0%)
Status: OK
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Logical Drive: 1
Size: 447.1 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 512 KB
Status: OK
MultiDomain Status: OK
Caching: Enabled
Unique Identifier: 600508B1001CE0F9FACF3A1358647115
Disk Name: /dev/sda
Mount Points: / 18.6 GB Partition Number 2
OS Status: LOCKED
Logical Drive Label: 0216D6F9PDNNF0ARH502MC7DFA
Mirror Group 1:
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, Solid State SATA, 240.0 GB, OK)
Mirror Group 2:
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, Solid State SATA, 240.0 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, Solid State SATA, 240.0 GB, OK)
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 2I:1:1
Port: 2I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004AG240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 39
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV706303CH240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 36
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:3
Port: 2I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712003V8240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 29
Maximum Temperature (C): 35
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 2I:1:4
Port: 2I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 240.0 GB
Drive exposed to OS: False
Native Block Size: 4096
Firmware Revision: N2010101
Serial Number: PHDV712004GA240AGN
Model: ATA INTEL SSDSC2BB24
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 31
Maximum Temperature (C): 37
SSD Smart Trip Wearout: Not Supported
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
Array: B
Interface Type: SATA
Unused Space: 0 MB (0.0%)
Used Space: 43.7 TB (100.0%)
Status: Failed Physical Drive
MultiDomain Status: OK
Array Type: Data
HP SSD Smart Path: disable
Warning: One of the drives on this array have failed or has been removed.
Logical Drive: 2
Size: 38.2 TB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 1792 KB
Status: Interim Recovery Mode
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Failed
Unique Identifier: 600508B1001CF94F84873C91FD89B549
Disk Name: /dev/sdb
Mount Points: None
Logical Drive Label: 04DA1DD6PDNNF0ARH502MC546F
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:2:1
Port: 1I
Box: 2
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHN3UZY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:2
Port: 1I
Box: 2
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNT517
Serial Number: NAHLKP0X
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 37
Maximum Temperature (C): 56
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:3
Port: 1I
Box: 2
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: NCH8E81Z
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:4
Port: 1I
Box: 2
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: NAHYMAUY
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 41
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:5
Port: 1I
Box: 2
Bay: 5
Status: Failed
Last Failure Reason: Write retries failed
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H942MD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Maximum Temperature (C): 43
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: False
physicaldrive 1I:2:6
Port: 1I
Box: 2
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: TDR2
Serial Number: K8JM5TKN
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:7
Port: 1I
Box: 2
Bay: 7
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: APGNW7JH
Serial Number: K8H9BW2N
Model: ATA HGST HDN726060AL
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 39
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
physicaldrive 1I:2:8
Port: 1I
Box: 2
Bay: 8
Status: OK
Drive Type: Data Drive
Interface Type: SATA
Size: 6001.1 GB
Drive exposed to OS: False
Native Block Size: 4096
Rotational Speed: 7200
Firmware Revision: T7MH
Serial Number: K1H623JD
Model: ATA HUS726060ALE610
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 35
Maximum Temperature (C): 40
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
Drive Authentication Status: Not Authenticated. Smart Array will not control drive LEDs.
Sanitize Erase Supported: False
raid raid5 hp-smart-array drive-failure raid-controller
raid raid5 hp-smart-array drive-failure raid-controller
asked 2 hours ago
MartinMartin
183
asked 2 hours ago
MartinMartin
183
asked 2 hours ago
MartinMartin
183
asked 2 hours ago
MartinMartin
183
asked 2 hours ago
MartinMartin
183
183
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
2
You probably have an heavily punctured array, which cause an early "planned death" of the replaced due to failed stripe reconstruction. You can read more information here and here
The solution is to backup, destroy the array, recreate it and restore from backup.
Next time avoid using a RAID5 array with such big drives. I strongly suggest using RAID6 or, even better, RAID10.
answered 1 hour ago
shodanshokshodanshok
26.4k34687
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "2"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f958650%2fhp-p840-hdd-raid-5-many-strange-drive-faiures%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
2
You probably have an heavily punctured array, which cause an early "planned death" of the replaced due to failed stripe reconstruction. You can read more information here and here
The solution is to backup, destroy the array, recreate it and restore from backup.
Next time avoid using a RAID5 array with such big drives. I strongly suggest using RAID6 or, even better, RAID10.
answered 1 hour ago
shodanshokshodanshok
26.4k34687
add a comment |
2
You probably have an heavily punctured array, which cause an early "planned death" of the replaced due to failed stripe reconstruction. You can read more information here and here
The solution is to backup, destroy the array, recreate it and restore from backup.
Next time avoid using a RAID5 array with such big drives. I strongly suggest using RAID6 or, even better, RAID10.
answered 1 hour ago
shodanshokshodanshok
26.4k34687
add a comment |
2
2
2
You probably have an heavily punctured array, which cause an early "planned death" of the replaced due to failed stripe reconstruction. You can read more information here and here
The solution is to backup, destroy the array, recreate it and restore from backup.
Next time avoid using a RAID5 array with such big drives. I strongly suggest using RAID6 or, even better, RAID10.
answered 1 hour ago
shodanshokshodanshok
26.4k34687
You probably have an heavily punctured array, which cause an early "planned death" of the replaced due to failed stripe reconstruction. You can read more information here and here
The solution is to backup, destroy the array, recreate it and restore from backup.
Next time avoid using a RAID5 array with such big drives. I strongly suggest using RAID6 or, even better, RAID10.
answered 1 hour ago
shodanshokshodanshok
26.4k34687
answered 1 hour ago
shodanshokshodanshok
26.4k34687
answered 1 hour ago
shodanshokshodanshok
26.4k34687
answered 1 hour ago
shodanshokshodanshok
26.4k34687
26.4k34687
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Server Fault!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f958650%2fhp-p840-hdd-raid-5-many-strange-drive-faiures%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
aSz4weCN3lasqg,APL89,7KNY,LvqoDWueIQ,kijogiD,ER2yIkt3fN,MfXOxIzzq,h XdA6jVw,Rqh b9f
